Tecnotest easylight 432b Bedienungsanleitung Seite 45

ELECTRONIC HEADLIGHT CENTERING DEVICE _____________________________________________ LUXMETER
3.0 - LUXMETER
After having adjusted the lower beams, driving beams or fog lamp, the
operator can check the light intensity of the beam by proceeding in the
following way: digit the LUX TEST key.
Example:
The message lux=000000 LUX=000 corresponding to 25 m is displayed
on the monitor and it keeps being displayed as long as the key itself is
pressed.
Once the key has been released, the indication will remain for 4 seconds
and will then return to the previous message.
Having terminated the operation, keep the ESC/OFF key depressed for 2
seconds to switch off the headlight centering unit.
OPERATING INSTRUCTIONS
ELECTRONIC HEADLIGHT CENTERING DEVICE _____________________________________________ LUXMETER
3.0 - LUXMETER
After having adjusted the lower beams, driving beams or fog lamp, the
operator can check the light intensity of the beam by proceeding in the
following way: digit the LUX TEST key.
Example:
The message lux=000000 LUX=000 corresponding to 25 m is displayed
on the monitor and it keeps being displayed as long as the key itself is
pressed.
Once the key has been released, the indication will remain for 4 seconds
and will then return to the previous message.
Having terminated the operation, keep the ESC/OFF key depressed for 2
seconds to switch off the headlight centering unit.
45 OPERATING INSTRUCTIONS 45