Using The Appliance - Philips HB952 Handbuch

ENGLISH
12
C
9 Firmly fasten knob 'A' again and release the stand.
C
You can determine whether the appliance has been set to the
required height by pulling out the measuring tape.
C
The measuring tape will automatically rewind if you move the red
tab sideways.
The appliance is now ready for use.

Using the appliance

1 Fully unwind the mains cord.
2 Put the plug in the wall socket.
C
The remote control will show all the functions that need to be
adjusted by the user.The tanning time is shown as 00.
Only types HB952 and HB953 show the symbol º : the symbol to
tan a part of the body.
Adjusting functions
C
Use the ¡ ™ buttons to switch from function to function.
1
The underlined symbol shows the function you are programming.
2 Selecting tanning, facial tanning or tanning a part of the body
Choose symbol • if you want to tan your whole body.
Choose symbol • and ª if you want to tan your whole body and give
your face an extra tan.
Choose º if you want to tan just a part of the body (types HB952 and
HB953 only).