Philips HB952 Handbuch Seite 14

ENGLISH
14
C
During the last minute of the session you will hear an intermittent
beeping sound.
C
During this minute, you can press the pause/repeat button § to
repeat the set time.
The display shows the set time and starts to count down.The
beeping stops.
It is also possible to set a new time.
By doing this, you can avoid the 3-minute waiting time which is
necessary to allow the tanning lamps to cool down after they have
been switched off.
C
Set a new time by pushing the ¢ or £ buttons.Then push the
5
start button ∞.
The beeping stops and the time that has just been set starts counting
down.
When you do not repeat the session or set a new time during the
last minute of the session, the countdown continues and the
appliance will automatically switch off as soon as the set time has
passed.
Interrupting the tanning session
C
Interrupt the tanning session by pushing the pause/repeat §
1
button.
The lamps will be switched off, P appears in the display together with
the remaining time. For 3 minutes the remaining time will blink. During
this time the lamps cool down.When the blinking has stopped, you can
switch the appliance back on again by pushing the § button.The
remaining time will now be counted down.
Changing the tanning time during a session
1 When you are tanning, you can change the set time by pushing
the ∞ button.The lamps will be switched off.Then set a new
time by pushing the ¢ £ buttons.Wait until the set time has
stopped blinking (this will take 3 minutes because the lamps
have to cool down first) and push the ∞ button again.