Philips HB952 Handbuch Seite 18

ENGLISH
18
750 hours
C
Choose function •. Set the time to 00 and hold down the
1
pause/repeat § button to display the number of operating
hours.
The maximum number of hours the counter can display is 999. After it
has reached this number, it will continue to count up from 000.
2 When you release the pause/repeat button, the number of
operating hours disappears from the display
C
On the packaging of the tanning lamps there is a symbol indicating
that the lamps should be replaced after 750 burning hours.The
appliance will tell you that you need to replace the tanning lamps
by showing an L on the display of your remote control.
C
After 750 burning hours, an L will appear on the left-hand side of
the display.This means that the tanning power of the appliance has
decreased so much that replacement of the tanning lamps is
advisable.
Of course, you can choose to postpone replacement for a while by
setting a longer tanning time.
C
To remove the L from the display, press the pause/repeat §
3
button, with time indication 00 and function symbol• on the
display. Hold down the pause/repeat button and press first the
¢ button and then the £ button and the L will disappear from
the display.
The UV filters protect against undesired radiation. It is therefore
important to have a damaged or broken filter replaced right away.
Have the tanning lamps (Philips HPA flexpower 400-600), the UV filters
and the mains cord replaced by an authorised Philips Service Centre
Only they have the knowledge and skills required for this job and the
original spare parts for the appliance.
Environment
The lamps of the appliance contain substances that can be harmful to
the environment.When you discard the lamps, make sure they are not
thrown away with the normal household waste but are handed in at an
official collection point.