Checking Drive Chain Tension; Chain Lubrication - Ducati MONSTER S4R Anleitung- Und Instandhaltungsheft

Checking drive chain tension (fig. 53)
When the vehicle is on the side stand, the drive chain
should be at a certain distance from the swinging arm
(min. distance 20-25 mm).
If the distance is not as specified, contact an Authorised
Dealer or Service Center to have the drive chain
tensioned.
Warning
For the rider's safety, it is fundamental that the
E
eccentric hub screws are properly tightened.
A chain that has not been properly tensioned might
cause early wear of any transmission parts.

Chain lubrication

The chain fitted on your motorcycle has O-rings that keep
dirt out of and lubricant inside the sliding parts. The seals
might be irreparably damaged if the chain is cleaned
using non-specific solvents or washed using steam or
water jets. Dry the chain using compressed air or
absorbent material and apply SHELL Advance Chain or
Advance Teflon Chain on each link.
52
Important
Using non-specific lubricants may lead to severe
damage to chain, front and rear sprocket.
20 ÷ 25 mm
fig. 53