Outdoor Peak Cut Setting - Panasonic CZ-64ESMC3 Installationshandbuch

Outdoor Peak Cut Setting

Demand 1 and Demand 2 for outdoor units can be changed.
Depending on the type of outdoor unit, it cannot be changed.
1
Press and hold the 3 buttons for 4
seconds or more simultaneously.
, , ►
2
Select the item to set.
▲ ▼ →
* After the setting is complete, this unit and outdoor units restart. Be sure to make this
setting while stopped.
* The displayed demand value is not the cut value, but the maximum power. (Same as the
EEPROM setting for the outdoor maintenance remote control)
3
Select O/D unit No. to set.
▲ ▼ →
4
Press ◄ ► to select the setting
target (Demand 1 or 2).
Press ▲ ▼ to change the demand value.
Press . The demand setting is complete.
5
To fi nish the Outdoor peak cut
Press → ◄ ► → and select
[YES].
6
The restart operation of outdoor
units is complete.
27
(EN)