Cocraft HD 130 Original Bedienungsanleitung Seite 5

f) Keep tools sharp and clean. Properly maintained cutting tools with
sharp blades are less likely to jam and are easier to control.
g) Use the electrical hand tool, accessories and similar according to the in­
structions and in an appropriate way suitable for the type of electrical hand
tool used. Also take into consideration your work environment and the type
of work to be done. Using the electrical hand tool for purposes other than for
what it is intended could result in a dangerous situation.
5) Service
a) Repairs and service should only be performed by qualified tradesmen, and
only with original spare parts. This guarantees that the safety of the electrical
hand tool is maintained.
Safety instructions specific to sanders
• Wear a dust mask whenever sanding and a dust extractor connected to
the machine should also be used wherever possible.
• Extra caution should be taken when sanding lead paint, wood, metal or other
materials which produce toxic dust. Make sure any bystanders in the work area
are well protected.
• Remember that dust caused by sanding can be very flammable when mixed with air.
Safety symbol guide
Read the entire instruction manual.
Always use ear defenders, dust masks, safety glasses or visors.
5