Options - Mettler Toledo AL54 Bedienungsanleitung

Technical data, options, optional equipment
24
Readability
Max. capacity
Repeatability (sd)
Linearity –/+
Sensitivity temperature drift
(10 °C ... 30 °C)
Settling time, typical
Adjustment weight external
(optional equipment)
Construction
External dimensions of balance
(W/D/H) in mm
External dimensions of packaging
(W/D/H) in mm
Weighing pan
Usable heigh of draft shield
Net weight (with packaging) kg
Level indicator
Number of leveling screws
*) Certified balance

6.2 Options

All optional equipment must be specified when ordering the balance. Retrofitting is only possible if carried out by a METTLER
TOLEDO service facility.
RxD
TxD
GND
5 1
9 6
CTS
RTS
The wide range of features of the L/L-S balances regarding documentation of the results can be utilized by connecting to a printer,
e.g. the RS-P42 or LC-P45 from METTLER TOLEDO. Printed results then make a decisive contribution to simplifying GLP/GMP-
compliant work.
Internal battery charger "AccuModule"
The models in the compact construction can be supplied with an internal battery charger "AccuModule" as an optional extra. They
can then run on rechargeable batteries instead of disposable ones. See Sections 2.3.3/6.4.
PL1501-S2 *)
0.2 g
1510 g
0.08 g
0.2 g
10 ppm/°C
1.5 s
1000 g
Compact
194x225x67
350x275x140
ø 160 mm
–
1.3 (2.3)
yes
4
RS232C interface and interface accessories
DATA
Every balance can be equipped with an optional RS232C interface for connection to
IN
a peripheral device (e.g. printer, auxiliary display or PC with a 9-pin male connector,
OUT
see Section 6.4). The balance must then configured to suit the peripheral device in a
menu dialog (Sections 4.3.8 – 4.3.11).
A detailed description of the available interface commands is given in the "Reference
Manual MT-SICS B-S/L/L-S balances 11780447". This can be downloaded from the
Internet (www.mt.com/pl or www.mt.com/al see "Support") and is only available in
English.
HAND
SHAKE
IN
OUT
RS232C special interface
This interface can only be used with the special auxiliary display for PL-S balances
Part no. 12102508 (see Section 6.4).
When this auxiliary display is connected, no special settings need to be made in the
menu.
PL3001-S PL3001-S2 *)
0.1 g 0.2 g
3100 g 3100 g
0.08 g 0.08 g
0.2 g 0.2 g
10 ppm/°C 10 ppm/°C
2 s 2 s
2000 g 2000 g
Compact Compact
yes yes
4 4
PL6001-S PL6000-S
0.1 g 1 g
6100 g 6100 g
0.08 g 0.8 g
0.2 g 2 g
10 ppm/°C 10 ppm/°C
2 s 1 s
5000 g 5000 g
Compact Compact
yes –
4 –