Herunterladen Inhalt Inhalt Diese Seite drucken

Introduction; Intended Use; Features; Technical Data - Parkside PDBS 6.2 A1 Bedienungs- Und Sicherheitshinweise

Druckluft-blechschere
Vorschau ausblenden Andere Handbücher für PDBS 6.2 A1:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 51

Introduction

The following pictograms are used in these operating instructions / on the equipment:
Please read the operating instructions!
Note
Observe the warning and safety in-
structions!
Caution! Explosion hazard!
Oil daily
Pneumatic metal shears PDBS 6.2 A1
Introduction
Congratulations!
You have chosen high-quality device
by our company. Familiarise yourself
with the product before using it for the first time. In
addition, please carefully refer to the operating instruc-
tions and the safety advice below. Initial operation of
this tool must be performed by trained personnel.
KEEP OUT OF THE REACH OF CHILDREN!

Intended use

The metal shears are an air-powered tool for hand-
yman use. It is designed to cut sheet metal. The user
should wear safety goggles and gloves to protect
himself from accidental contact with potentially sharp
edges. Keep these instructions in a safe place. When
passing this product on to others, please also include
all the documents. Any use other than the intended
is prohibited and potentially dangerous. Damages
resulting from noncompliance or misuse are not cov-
ered by the warranty and are not included in the man-
ufacturer's liability. This device has been designed
6
GB
109803_par_Druckluft-Blechschere PDBS 6.2A1_content_HU_CZ_SK.indd 6
Never use hydrogen, oxygen, carbon
dioxide or other bottled gases as an
energy source.
Wear ear protection, dust mask, safety
glasses and protective gloves.
Compressed air hose
Dispose of packaging and device in
an environmentally-friendly way!
for household use and may not be used for commer-
cial or industrial purposes.

Features

Check that all the items are present and
that the product is in perfect condition
immediately after unpacking. Never use
the product if it is defective.
Plug nipple for compressed air connection
1
Trigger
2
Knife
3

Technical Data

Max. working pressure: 6.2 bar
cuts aluminium sheets up to 2.4 mm
cuts sheet metal up to 1.1 mm
Weight:
1220 g
Noise and vibration
ATTENTION!
Always wear hearing protection!
09.04.15 16:09

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis