Risk of damage of the product
Only use the specified type of battery / rechargeable battery!
Insert batteries / rechargeable batteries according to polarity marks (+) and (—) on
the battery / rechargeable battery and the product .
Use a dry lint-free cloth or cotton swab to clean the contacts on the battery /
rechargeable battery and in the battery compartment before inserting!
Remove exhausted batteries / rechargeable batteries from the product immediately .
Preparing the product for use
Remove the battery from the box and the wrapper .
Insert the battery with the + contact first, and then push down the – contact .
Replacing the battery: see fig . B .
Operation
Setting the time
To set the time, turn the small wheel 2 until the hands are in the desired positions
(see fig . B) .
Cleaning and care
The product should only be cleaned on the outside with a soft dry cloth .
If the wall clock is not going to be used, remove the battery .
GB/CY
9