Before First Use; Replacing The Battery; Operation; Cleaning And Care - Auriol HG03030A Bedienungs- Und Sicherheitshinweise

Clean the contacts on the battery / rechargeable battery and in the battery
compartment before inserting!
Remove exhausted batteries / rechargeable batteries from the product immediately.
Risk of property damage
Use only the recommended battery type!
When inserting the battery ensure the correct polarity!
If necessary, clean the battery and product contacts before inserting the battery.
Promptly remove a drained battery from the product.
˜ Before first use
Remove all packaging materials from the product.
Remove the battery insulation strip from between the battery and the contact. Please
see fig. B for replacing battery.
˜ Replacing the battery
1. Turn wall clock over. Place it on a soft underlay to avoid scratching the surface.
2. Remove the battery and then insert new battery with correct polarity.
3. Be sure to first insert the battery into the battery compartment
terminal, and press down the negative terminal of the battery.
4. The wall clock is now ready for use.
˜ Operation
Setting the time
To set the time, turn the small wheel
(see fig. B).
˜ Cleaning and care
The product should only be cleaned on the outside with a soft dry cloth.
If the wall clock is not going to be used, remove the battery.
until the hands are in the desired positions
2
from the positive
3
GB 9