Doses For 1,5 Kg Of Mixture - FIMAR MPF15N Benutz Und Wartungsanleitung

▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬ PASTA FRESCA appliance
7. At the end of the kneading time, activate food products extrusion cycle.
– For model MPF15N - MPF25N: rotate the selector (C) to "2" (extrusion) and press the
(A) button to start the extrusion cycle. To stop the appliance press the (B) button.
– For model MPF40N - MPF80N: press the (F) button (extrusion) to activate the extrusion
cycle and rotate the (G) selector to "1" to activate forced ventilation in the extrusion
area. To stop the appliance press the (B) button.
8. If electric knife is present, position it on
the die handwheel (N), insert the plug (Q)
into the connector (R), positioning the
switch (H) to "1" to activate rotation and
use regulator (L) to vary the die speed.
9. Press the button (B) to stop the appliance
when finished.
GB
If it is the first time the appliance is used,
remove any protective linings and accura-
tely clean to remove any construction ma-
terial residue before starting it.

DOSES FOR 1,5 KG OF MIXTURE

1 kg of flour type 00 + 7÷8 egg (an egg corre-
sponds to approx 50 g or 50 ml), or 380÷400
ml of liquid among eggs and water (use at least 3 eggs to give the mixture consistency).
The kneading cycle lasts approx 6÷8 minutes.
The mixture obtained appears in granular
form (see figure).
If towards the end of the kneading cycle you
have not obtained a granular form, you can
add liquid or flour in small doses to obtain the
correct consistency.
- 12 -
N
R
Q
English language