Unpacking, Handling And Installation Instructions - FIMAR MPF15N Benutz Und Wartungsanleitung

▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬ GENERAL AND SAFETY INFORMATION

UNPACKING, HANDLING AND INSTALLATION INSTRUCTIONS

– The appliance is delivered packaged in a specific container and, if necessary, suitably
stabilised with shockproof material to ensure its integrity.
Packaging may be on a pallet according to appliance features, destination and transport
means to facilitate handling.
All information required for handling (loading and unloading) in safe conditions is indi-
cated directly on the packaging.
– The package must be handled according to its specifications (weight, dimensions, etc.).
For limited dimensions and weights, the package may be handled manually. Otherwise,
use a lifting device with suitable capacity.
Upon receiving the appliance, make sure all components are integral. In the event of
damages or missing parts, contact your local dealer to arrange for future procedures.
– Installation must be performed by expert and authorised personnel who must previously
ensure that the electrical mains meet specific current laws, regulations and standards
in effect in the country of use.
– Before installing the appliance, make sure the selected site is suitable, sufficiently ven-
tilated and lit, stable and with surrounding areas sufficient for easy cleaning and main-
tenance. Also make sure the support surface is stable, level and easy to clean to avoid
the risk of dirt accumulations and food product contamination.
Personnel authorised to perform electrical connections must make sure the mains
grounding system is efficient and that the mains voltage and frequency match the
data listed on the appliance identification plate.
For appliances with special features (shape, weight, dimensions, etc.) the information in-
cluded in this paragraph may not be thorough. Any additional information is listed in the par-
agraph on "Lifting Procedures" for each single appliance.
- 7 -
GB
English language