To Set The Symbol In Beep - Sony SRF-DR2000 Bedienungsanleitung

To set the Symbol IN Beep

You can set your receiver to beep or not to when receiving
information related to your symbols.
1
Press the Function button corresponding to ↑ UP or
↓ DWN to move the cursor to Symbol IN Beep.
2
Press the Function button corresponding to either + or –
to select ON or OFF.
To set the High/Low Beep
All symbols, when registered, are preset with the High/Low
Alarm function. You can set your receiver to beep or not when
the price of your selected stock reaches your stipulated limits.
1
Press the Function button corresponding to ↑ UP or
↓ DWN to move the cursor to High/Low Beep.
2
Press the Function button corresponding to either + or –
to select ON or OFF.
When receiving symbol data
When symbol data is being received the SYM indicator on the
left of the display lights up.
Note
When you press the Function button corresponding to ID'S in the
display, you can see Your ID and Password ID, but they are not
needed for the radio operations. Press the Function button
corresponding to TOP in the display to return to the previous
display.
(For details see "ID Numbers" page 32)
31-
GB