Introduction; Intended Use; Description Of Components; Package Contents - Parkside PET 25 C2 Originalbetriebsanleitung

ELECTRIC NAILER/STAPLER
PET 25 C2

Introduction

Congratulations on the purchase of your new appli-
ance . You have chosen a high-quality product . The
operating instructions are part of this product . They
contain important information about safety, usage
and disposal . Before using the product, please
familiarise yourself with all operating and safety
instructions . Use the product only as described and
for the range of applications specified . Please also
pass these operating instructions on to any future
owner .

Intended use

This electric staple gun is intended for stapling
cardboard, insulating material, leather, material
(textiles or natural fibre) and comparable materials
onto softwoods or plywood-like material in private
households . The appliance is only for use in dry
rooms . Any other uses of or modification to the
appliance is deemed to be improper and carries
the risk of serious personal injury . The manufacturer
accepts no responsibility for any damage attribut-
able to misuse . This appliance is not intended for
commercial use .

Description of components

Trigger
ON/OFF switch
Impact force control
Magazine slider
Rip fence
Magazine
Scale
Fill level indicator
Face plate

Package contents

1 electric nailer/stapler PET 25 C2
300 staples 25 mm
200 staples 15 mm
300 nails 32 mm
200 nails 25 mm
1 hex key
1 set of operating instructions
■ 30 │ GB │ MT

Technical data

Type:
Rated voltage:
Rated current:
Operations:
30 / min
Short-term operation
Dureé /
Duration
(SO):
KB
max.
15 min
Protection class:
Staple width:
Staple length:
Type 55
15–25 mm
Nail length:
Type 47
15, 20, 25,
32 mm
Noise and vibration data:
Noise measurement value determined in accord-
ance with EN 60745 . The A-rated noise level of
the power tool is typically as follows:
Sound pressure level:
Sound power level:
Uncertainty:
Wear hearing protection!
Vibration values determined in accordance with
EN 60745:
Vibration emission value: a
Uncertainty K = 1 .5 m/s
PET 25 C2
230 V∼ (AC) 50 Hz
3 .7 A
up to 30 impacts/
min
max . 15 min
II /
(Double insulation)
6 mm
15–25
15, 20, 25, 32 mm
L = 81 .3 dB(A)
pA
L = 92 .3 dB(A)
WA
K = 3 dB
pA/WA
= 2 .510 m/s ,
2
h
.
2
PET 25 C2