Gmini TUTUS 123 IsoFix Benutzerhandbuch Seite 40

Suitability
•Certification
as a child safety seat to be installed in a vehicle
TYPE / BW02 – TT
Model : GM1709
Child safety seat Tutus 123 IsoFix
Tested and certified according to the Regulation ECE R44/2004
Group: I + II + III
Child's weight: 9 - 36 kg
This child's safety seat was designed, tested and certified according to the requirements
of the European Standard on equipment to provide child safety (Regulation ECE R44/2004).
Seal of approval (circled) and approval number are placed on the approval label
(sticker placed on the child safety seat).
This approval will lose its validity, if you modify the subject child safety seat in any way.
The given child safety seat can only be modified by its manufacturer
Use in vehicle
•Use in vehicle
Please do observe current regulations in the given area for your country.
Seatbelt must be approved according to the Regulation UN/ECE No. 16 or according to
a similar standard.
Do not use on a seat equipped with a 2-point seat belt.
Can be used on seats equipped with a 3-point seat belt.
Before purchasing a seat please check whether the subject seat is suitable for your vehicle.
On long rides take advantage of driving breaks in order for your child to have a certain time to rest
away from the seat.
Set a good example for your child by fastening your own seat belt as well.
Tell your child that it should not play with the buckles of the child safety seat harness.
Questions:
Contact the supplier or importer of your child safety seat, if you want to file a claim or if
you have any other questions.
Your child safety seat can be installed on majority of seats in various vehicles. Despite this fact you
may encounter that some types of vehicles will not allow the child safety seat to be installed. In
such a case try another child safety seat.
Do not use a 2 point
Install in a vehicle equipped
with a 3-point
vehicle seat belt.
seat belt