English: Programming Via The Keypad - Siemens SR35i Konfigurationshandbuch

1

ENGLISH: Programming via the keypad

Siemens AB
Security Products
1. Display for messages:
NO NETWORK = No communication on Ethernet.
GLOBAL COM = No communication between SR35i.
LOCAL COM = No communication to doors.
PC DB DIFF = Database differs in PC and SR35i.
SR DB DIFF = Database differs in any SR35i.
PC x = x indicate number of users logged on.
See the following pages for more status commands.
2. Address setting (01 - 16).
3. Escape Key (Exit menus/back to MAIN MENU)
4. Backspace while entering (Digits/Letters)
5. Used in some menus for confirmation
6. Enter Key
7. Similar to the Tab-key on a PC (e.g. when setting IP)
8. Numerical keys 1-9 / 0
9. Currently no function
By opening the downward lid (after power-up and start sequence) the following
display appears:
MAIN MENU: 1) SYSTEM INFORMATION
2) NETWORK SETTINGS
3) DISK MENU
By pressing the digits 1 or 2, more sub-menus will be displayed. Pressing 3 will al-
low for removing the CF8 memory card in a correct way (otherwise the memory
content may be damaged!). In the sub-menus can more digits be entered which of-
fers the possibility to change more options.
With the ESC key you will (mostly) step back to the start menu (MAIN MENU) re-
gardless of the current menu.
In some menus the
* key are used in some menus for deleting or advancing.
Enter key is used for confirmation. The key and the
5
05.2011