List Of Pictograms Used; Introduction; Intended Use; Parts Description - Parkside PBSG 95 C3 Originalbetriebsanleitung

List of pictograms used

Read the instruction manual.
Wear hearing protection.
Wear a dust mask.
Protection class II
(double insulation)
Drill bit sharpener PBSG 95 C3

Introduction

We congratulate you on the purchase of your
new product. You have chosen a high quality
product. The instructions for use are part of the
product. They contain important information
concerning safety, use and disposal. Before us-
ing the product, please familiarise yourself with
all of the safety information and instructions for
use. Only use the product as described and for
the specified applications. If you pass the prod-
uct on to anyone else, please ensure that you
also pass on all the documentation with it.

Intended use

This product is intended for sharpening steel
drill bits according to DIN 338, DIN 340, DIN
345, DIN 1869 and DIN 1897 (style Type N).
Carbide drills must not be sharpened. Any other
Wear eye protection.
Wear protective, slip-resistant
footwear.
Wear protective gloves.
Risk of electric shock! Unplug the
mains plug from the socket prior to
performing maintenance or repairs.
use or modification of the product shall be con-
sidered as improper use and could give rise to
considerable dangers. The manufacturer as-
sumes no liability for damages due to improper
use. Not intended for commercial use.

Parts description

Dial („STONE" = brick)
1
Brick cover
2
Screw, brick cover
3
ON/OFF switch
4
Brick
5
Metal ring
6
Screw connection
7
Brick holder
8
Spring
9
Louvres
10
Drill guide
11
GB/MT 33