Switching On And Off / Setting The Speed Range; Advice On Working With Materials / Tools / Speed Ranges - Parkside PFBS 9.6 A1 Originalbetriebsanleitung

Switching on and off / Setting
Q
the speed range
Switching on / Setting the speed range:
j
Set the ON / OFF switch
j
Set the rotational speed control
between „1" and „MAX.".
Switching off:
j
Set the ON / OFF switch
Advice on working with
Q
materials / Tools / Speed ranges
j
Use the highest speed when working on steel
or iron with the milling bits.
Setting the appropriate speed
Symbols Material
Rotational
speed
control
1
1- 3 Plastics and low melting
point materials
4 - 5 Stone, Ceramics
Softwood, metal
5
Examples of appropriate tool selection Function
Function
Drilling
Milling
Engraving
Polishing,
derusting
CAUTION!
Use only the lightest
contact pressure of
the tool on the work-
piece.
to position "I".
5
to a position
1
to position "0".
5
Accessory
HSS drill
12
Milling bits
21
Engraving bits
20
Metal brush
16
Polishing wheel
14
j
Use a short trial on a test piece to determine the
optimum rotational speed range for working on
zinc, zinc alloy, aluminium, copper and lead.
j
Use the low speed range for working on plastics
and low-melting point materials.
j
Use high speeds on wood.
j
Use the medium speed range for cleaning,
polishing and buffing.
The following information shall be considered as
recommendatory only. Learn by practical experience
which tools and settings are the best for the materi-
als you work with.
6-7 Hardwood
Max Steel
Application
Drilling wood (see Fig. C)
Various tasks, e.g. hollowing out, gouging,
shaping, grooving or slotting
Markings (see Fig. D)
Derusting (see Fig. E)
Working on various metals and plastics, in
particular noble metals like gold or silver
(see Fig. F)
Operation
GB/IE 15