Weekly Timer - Fujitsu Airstage UTY-CGG Bedienungsanleitung

To set the operation mode
G Fan speed setting
To start/stop operation
G Wait 3 seconds after the operation settings are completed. After 3 seconds, the operation settings are trans-
mitted. ( flashes)

WEEKLY TIMER

The timer function is not available depending on the initial setting.
G Different schedules can be set for each day of the week.
G Four timers can be set for each day.
G Operation on/off time, operation mode, and temperature can be specified for each timer.
To start/cancel the WEEKLY timer operation
The timer does not start if the time is not set.
Press the ALL TIMER button to start or cancel the WEEKLY timers for all indoor units.
Press the Select button to select the indoor unit.
Press the Timer Mode (DELETE) button to start or cancel the WEEKLY timers.
To set the WEEKLY timer
1
CLOCK ADJUST
Press the PROGRAM (CLOCK AD-
JUST) button.
* Do not press this button for two sec-
onds or more, otherwise you will en-
ter the time setting mode.
G Day of the week setting
3
DAY
Press the DAY button to select the day of the week.
* For ALL, all of the days can be set together when a
each day.
Press the Fan Control button to set the fan speed.
AUTO
* If DRY is selected, the fan speed can be set to AUTO only.
Press the Start/Stop button for selected indoor unit(s).
OFF
ON
2
Press the Select button to select the indoor unit.
* If all indoor units are selected, the times for all of the registered indoor unit
timers are set at once.
ALL
HIGH MED
• If any of the indoor units are in the timer mode, pressing this
button cancels the timers for all indoor units.
• If none of the indoor units are in the timer mode, pressing
this button starts the timers for all indoor units.
S M T
SUN MON TUE
appears around
LOW
All indoor units
W T F S
WED THU FRI SAT
En-4