System Configuration (Connections); Wconnection Of Device With - Panasonic AW-HE870E Bedienungsanleitung

System configuration (Connections)

wConnection of device with a composite/component input connector
p Connection to any device which has a composite signal input connector, such as a monitor or a VTR, must be made through
the VIDEO OUT connector.
p Use the AW-CA50T8 camera control cable, which is available as an optional accessory, to connect the I/F REMOTE
connector on the unit with the device equipped with HD/SD component signal input connectors.
p Composite signals (from the VIDEO OUT connector) and component signals (from the I/F REMOTE connector) can be output
at the same time.
p Use the DC cable with ø5.5 plug, supplied with the AW-HE870, for connection to the 12 V input connector.
Camera control cable AW-CA50T8 (10 m)
VIDEO OUT
connector
75 j coaxial cable
Composite video input
connector (VIDEO IN)
DC cable with ø5.5 plug
(supplied with AW-HE870)
- 22 (E) -
Monitor
(Composite signal input)
AC Adapter
AW-PS505A
Y
Pb
Monitor
Pr
(Component signal input)