Formulation; Item Settings - OHAUS Adventurer Serie Bedienungsanleitung

EN-26

4.9 Formulation

Note: Before using any application, be sure the balance has been leveled and calibrated.
Use this application for compounding and recipe making. The maximum number of components is 50.
Formulation
1. In the upper left portion of the home screen, select Formulation
2. Press Start to begin the compounding process.
3. Place the first ingredient on the pan (or in a tared container) and press Accept to store the component.
4. Continue adding components and pressing Accept to store the weight of the individual components until
the formula is complete. The Total line shows the total weight of all the components.
5. Press Stop to finish the Formulation. The Formulation results are displayed:
Note: If Filler is set to On (see section 4.9.1 below), the balance will ask to add a filler material to complete
the formulation. Add the filler material and press Accept to complete the formulation and display the results.
6. Press Save to USB to save the results to a USB flash drive or Exit to return to the Formulation Home
screen.
Note: The formulation results will be cleared when a new formulation starts.
4.9.1

Item Settings

To view or adjust the current settings
Touch the Item Settings button. The Settings screen
appears.
Filler: If set to On, a filler material is asked for at
the end of the formulation.
Automatic Mode: If set to On, the balance will
automatically Tare after the component weight
has been accepted.
Print settings: Change printing settings. See
section 7 for more information.
GlobalScientificSupply
www.
The Formulation Home screen
Main Display Line
Reference Fields
Application Buttons
GLOBAL SCIENTIFIC SUPPLY
.com
The Laboratory Supply Company!
ADVENTURER BALANCES
Application
Icon
info@GlobalScientificSupply.com