CONDTROL Super RotoLaser Bedienungsanleitung Seite 6

CONDTROL Super RotoLaser
EN
ROTARY LASER
Remote control
Use remote control to manage the product at distance up to 60 m.
Symbols that appear on the display of remote control are similar to
symbols that appear on the product display.
1. Display
Keyboard:
2. Turn on/off
3. Move laser dot/scan sector clockwise/ tilt angle adjustment
4. Move laser dot/scan sector counterclockwise/ tilt angle
adjustment
5. Adjustment of tilt angle for axes
X and Y
6. Scan mode/scan sector
7. Change rotation speed/stop rotation
8. Inclined planes mode
10
user manual
1
2
3
4
5
6
7
8
CONDTROL Super RotoLaser
EN
ROTARY LASER
Laser receiver
Laser receiver allows using the product outdoor as well as while
intensive sunshine at distance up to 500 m (in diameter) when it's
difficult to recognize laser beam.
2 3 4
OPERATION
Battery charging
If symbol starts flashing on the product display while opearion
please charge the batteries.
Product has 2 battery charger jacks – under control panel and on
battery unit. Reserve battery unit included in the set, allows operation
user manual
1
5
6
1. Display
Keyboard:
2. Turn on/off
3. Turn on/off sound signal
4. High/normal accuracy mode
5. Receiver sensor
6. Vial
11