Care And Maintenance - CONDTROL Super RotoLaser Bedienungsanleitung

CONDTROL Super RotoLaser
EN
ROTARY LASER

CARE AND MAINTENANCE

This product is a high-precision instrument and requires careful
handling. Before using as well as after physical impact (falling, hitting)
carry out accuracy check.
Observation of the following recommendations will extend the life of
the device:
1) Store the product, spare parts and its accessories beyond reach of
children and unauthorized people.
2) The product should be transported in the off state inside the case
only.
3) Do not store the product in dusty or dirty locations. The product is
dust and dirt resistant, but long-time exposure to these elements may
damage internal moving parts of the product.
4) Store the product in dry locations. The product is water resistant,
but precipitate, humidity and liquids containing minerals may damage
the electrical circuits of the product. Do not try to dry the unit by fire
or a hairdryer.
5) Do not store the product in locations where temperature is more
than +50°С. High temperatures reduce the life of electronic devices,
damage batteries, deform or melt some plastic parts.
6) Do not store the product in locations where temperature is less
than -10°С.
After storage in low temperature conditions and subsequent transfer
to a warm room, the device is heated, causing moisture condense
inside the product and damage the chip.
7) Protect the product from bumps, drops, strong vibrations. This can
lead to loss of accuracy.
20
EN
ROTARY LASER
user manual
8) Carry out accuracy check regularly (see paragraph «Accuracy
check»).
9) To clean the product use a soft wet cloth. Do not use harsh
chemicals, cleaning solvents or detergents.
10) Сlean laser aperture periodically with a soft lint-free cloth with
isopropyl alcohol.
11) Remove batteries from the product if it not used for a long time.
12) Do not leave discharged batteries in the product.
CONDTROL Super RotoLaser
user manual
21