Bestway Lay-Z-Spa Bedienungsanleitung Seite 9

NOTE: When inflating, you will notice that air will be expelled from the area where the air hose connects to
the pump, this is normal for technique requirements.
NOTE: Do not use an air compressor to inflate the pool.
NOTE: Do not drag the pool on rough ground as this may cause
damage to the pool liner.
NOTE: Inflation time for reference only.
NOTE: Pressure gauge is for inflation purpose only, and the value
of the pressure gauge is just for reference, should not be used as
a precision instrument.
Air Valve Check (for spa with quick inflation/deflation valve)
Always check the air valve carefully before inflation to ensure there is not an air leak.
If the air valve is loose, use the provided wrench to fasten the air valve following
these steps:
With one hand, hold the backside of the air valve from the inner side of the spa wall
and turn the wrench clockwise.
NOTE:
1. Do not over tighten.
2. Do not adjust the air valve connector when the spa is in use.
SPA PUMP EQUIPOTENTIAL BONDING TERMINAL
It is recommended to arrange for a qualified electrician to connect
the spa pump to an equipotential bonding terminal using a
minimum 2.5mm
Assembly part refer to the provided installation leaflet.
MONACO
PALM SPRINGS ST.MORITZ HAWAII PARIS BALI
1
HONOLULU
5
TAHITI
BALI
MIAMI
PARIS
HAVANA
VEGAS
HAWAII
PALM SPRINGS
ST.MORITZ
HONOLULU
6
2
10
S-S-005855/14x21cm/54112; 54113; 54123; 54129; 54148; 54154; 54171; 54174; 54175; 54183; 54186/欧规AirJet SPA说明书/JS-YF-2016-B-16420/
2
solid copper conductor.
MIAMI PALM SPRINGS ST.MORITZ
2
MONACO
5 min
A
5 min
B
0.48bar (7PSI) ~ 0.69bar (10PSI)
5 min
7
2
11
9
PARIS HAWAII HAVANA
3
PARIS BALI
A
D
8
2 min
12
VEGAS BALI TAHITI HONOLULU
4
B
C
E F
9
13
S-S-005855