Specifications - Sony PFM-42B1 Bedienungsanleitung

Specifications

Specifications
Video processing
Preset signal See page 27 (GB).
Sampling rate 13.5 MHz to 140 MHz
Panel system AC-type Plasma Display Panel
Display resolution 1 024 dots (horizontal) × 1 024
lines (vertical)
0.90 (horizontal) × 0.51 (vertical)
Pixel pitch
mm (
921 (horizontal) × 522 (vertical)
Picture size
mm (36
Panel size 42-inch (diagonal 1 058 mm)
Inputs and Outputs
INPUT1/INPUT2
RGB/YUV D-sub 15-pin (female) (See "Pin
assignment" on page 49 (GB).)
AUDIO Stereo minijack
500 mVrms, high impedance
VIDEO (NTSC, PAL, SECAM, NTSC4.43,
1)
PAL60, PAL-M)
COMPOSITE IN BNC (×1)
Composite video, 1 Vp-p ±2 dB
sync negative, 75-ohm
(automatic termination)
Y/C IN Mini DIN 4-pin (×1)
Y (luminance): 1 Vp-p ±2 dB sync
negative, 75-ohm terminated
C (chrominance): Burst
0.286 Vp-p ±2 dB (NTSC),
75-ohm terminated
Burst 0.3 Vp-p ±2 dB (PAL),
75-ohm terminated
AUDIO IN Stereo minijack
500 mVrms, high impedance
COMPOSITE OUT
BNC (×1) Loop-through
AUDIO OUT Stereo minijack
500 mVrms, high impedance
REMOTE (RS-232C)
D-sub 9-pin (×1)
.........................................................................................................................................................................................................
1) The PFM-42B1E/42B2E are not equipped with VIDEO connectors. For the PFM-42B1E/42B2E, composite video and
Y/C input can be input to the display when the BKM-B10 video input adaptor or BKM-B13 video input & control S
adaptor (not supplied) is installed in the display unit.
48
(GB)
×
1 1
⁄ ⁄ inches)
16 32
× 20
3 5
⁄ ⁄ inches)
8 8
Safety regulations
UL1950, CSA No. 950 (c-UL),
FCC Class B, IC Class B,
EN60 950 (NEMKO), CE,
C-Tick
Component Input Adaptor (with Control
S) BKM-B12 (Not supplied)
INPUT3
RGB/YUV Phono jack (female) (×3)
CONTROL S (IN/OUT)
Stereo minijack (×2)
5 Vp-p
Video Input & Control S Adaptor BKM-B13
(Not supplied)
VIDEO (NTSC, PAL, SECAM, NTSC4.43,
PAL60, PAL-M)
COMPOSITE IN BNC (×1)
Composite video, 1 Vp-p ±2 dB
sync negative, 75-ohm
(automatic termination)
Y/C IN Mini DIN 4-pin (×1)
Y (luminance): 1 Vp-p ±2 dB sync
negative, 75-ohm terminated
C (chrominance): Burst
0.286 Vp-p ±2 dB (NTSC),
75-ohm terminated
Burst 0.3 Vp-p ±2 dB (PAL),
75-ohm terminated
COMPOSITE OUT
BNC (×1) loop-through
CONTROL S (IN/OUT)
Stereo minijack (×2)
5 Vp-p
General
Power requirements
100 V to 240 V AC, 50/60 Hz,
PFM-42B1/42B1E:
4.5 A to 1.8 A
PFM-42B2/42B2E:
4.2 A to 1.5 A