Adjusting The Picture; Adjusting The Contrast, Brightness, Chroma, And Phase, Etc - Sony PFM-42B1 Bedienungsanleitung

Adjusting the Picture

Adjusting the Picture
While watching the picture, you can adjust contrast,
brightness, chroma, phase, and so on, to suit your
taste. The adjustments can be carried out for each
input signal separately. You can also store the
adjusted levels in memory.
Adjusting the Contrast, Brightness,
Chroma, and Phase, etc.
Press MENU so that the main menu appears on the
display panel and select "CONTRAST",
"BRIGHTNESS", "CHROMA", "PHASE",
"PICTURE AGC", "COLOR TEMP" or
"SHARPNESS" from the PIC CONTROL menu with
v / V.
CONTRAST
Select "CONTRAST" with v / V and press ENTER.
Adjust the contrast with v / V in the range from MIN
(0) to MAX (+100).
v: to increase picture contrast
V: to decrease picture contrast
BRIGHTNESS
Select "BRIGHTNESS" with v / V and press
ENTER.
Adjust the brightness with v / V in the range from
MIN (–50) to MAX (+50).
v: to make the picture brighter
V: to make the picture darker
CHROMA
Select "CHROMA" with v / V and press ENTER.
Adjust the chroma with v / V in the range from MIN
(–50) to MAX (+50).
v: to increase color intensity
V: to decrease color intensity
28
(GB)
PHASE
Select "PHASE" with v / V and press ENTER.
Adjust the phase with v / V in the range from MIN
(–50) to MAX (+50).
v: to make the overall picture greenish
V: to make the overall picture purplish
Automatic brightness control —
Enhancing the image contrast
If the average brightness of the image is low, the
system can automatically raise the contrast level to
enhance the brightness. This function works well for
displaying dark images.
Select "PICTURE AGC" with v / V and press ENTER.
Set PICTURE AGC to ON or OFF with v / V.
COLOR TEMP (Color temperature)
You can also set the color temperature. You can select
HIGH or LOW, or adjust each gain more precisely.
Up to six adjusted color temperatures can be
registered. You can rename them (up to six characters
in length).
1
Select "COLOR TEMP" with v / V and press
ENTER.
2
Select the color temperature with v / V and press
ENTER.
HIGH: to set the color temperature to high
LOW: to set the color temperature to low
1 – 6: to set the gain more precisely
When you select HIGH or LOW, the menu returns
to the PIC CONTROL menu.
When you select "1" to "6"
When you select "1" to "6", the following menu
appears on the display panel.
C O L O R T E M P
R E D G A I N
G R E E N G A I N
B L U E G A I N
N A M E S E T
S E L E C T A D J U S T
The PFM-42B1/42B1E displays "255" for each gain.
: 1
: 1 2 8
: 1 2 8
: 1 2 8
ENTER E N D MENU