Sony PFM-42B1 Bedienungsanleitung Seite 74

Using On-screen Menus
qj DISPLAY
Select ON to display the input signal information for
about five seconds at the top of the display panel
when the power is turned on or when switching the
input signal.
qk W-VGA
Select ON to input the W-VGA (852×480) signal.
When you set this item to ON, the VGA input signal
is determined to be 852 × 480. Otherwise, the VGA
input signal is determined to be 640 × 480.
ql CLOSED CAPTION
Displays closed captions.
For details, see "Displaying closed captions" on page
25 (GB).
w; COLOR SYSTEM
Selects the input signal.
AUTO: to display NTSC, PAL or SECAM signals
443NT: to display NTSC4.43 signals
PAL60: to display PAL60 signals
PAL-M: to display PAL-M signals
wa YUV LEVEL (PFM-42B2/42B2E only)
Select the component signal level.
SMPTE: SMPTE level signal
BETA: BETACAM level signal
ws SCREEN FILL
Selects the point of origin for resizing the picture.
CENTER: Sets the point of origin at the center of
the display panel.
CORNER: Sets the point of origin at the upper-left
corner of the display panel.
wd POWER CONTROL
Sets the length of time until the system goes into the
power saving mode.
For details, see "Controlling Power On/Off Automatically
(Power Control Function)" on page 39 (GB).
wf SCREEN SAVER
Enables a screen saver to reduce afterimage or
ghosting.
For details, see "Reducing Afterimage/Ghosting (Screen
Saver Function)" on page 37 (GB).
wg TIME SET
Sets the time.
For details, see "Adjusting the time" on page 25 (GB).
wh LANGUAGE
Selects the on-screen language (English, German,
French, Italian, Spanish or Japanese).
22
(GB)
For details, see "Selecting the On-screen Language" on
page 36 (GB).
wj SERIAL REMOTE (PFM-42B2/42B2E only)
Setting the Serial Remote.
For details, see "Setting the SERIAL REMOTE" on page
43 (GB).
wk NETWORK ADAPTOR (PFM-42B2/42B2E
only)
Setting the Network Adaptor.
For details, see "Setting the NETWORK ADAPTOR" on
page 44 (GB).
MEMORY menu
This menu is used for saving or recalling the settings
in the PIC CONTROL and PIC SIZE menus.
wl M E M O R Y
L O A D
e;
S A V E
S E L E C T
For details, see "Using the Memory Function" on page
34 (GB).
wl LOAD
Recalls the preset settings.
e; SAVE
Saves the settings.
REMOTE menu
This menu is used for remote control settings.
R E M O T E
ea
I N D E X N o .
es
R E M O T E M O D E
R E M O T E O N L Y
ed
S E L E C T
ea INDEX No.
Sets the index number of the display.
S E T ENTER E N D MENU
: 0 0 1
: T V
: O F F
S E T ENTER E N D MENU