hexagon DIGICO 200 Gebrauchsanleitung Seite 69

When set to MIN, your Digico displays the lowest meas-
ured value. In the MAX-MIN mode, it shows the difference
between both highest and lowest values. Each of them
remains stored in the memory as long as no zeroing has
occurred.
PRESET Mode
For additional information, report to page 7.
This mode allows you to enter a PRESET value in either of
the following formats:
± XXXX.XX mm
± XXX.XXX mm
± XX.XXXX in
± X.XXXXX in
The highest PRESET value matches 800 mm / 31.496 in.
TOL Mode
For additional information, report to page 7.
12