hexagon DIGICO 200 Gebrauchsanleitung Seite 67

6 Take a measurement inside the setting ring.
7
SET
8
SET
9 Proceed with the bore measurement.
As long as display shows MIN, (MAX), PRESET and/or INV,
the indicator continues to operate using each function.
Press the key
mode.
10
40,005
Keep pressing
this key until
PRESET is
displayed.
The measured
value is now
allocated to the
lowest point.
Press the SET key
to reset the value.
to quit and get back to the MAX–MIN
MODE
Valeur Min.