CO/Tech ZHQ1821SH-ADCA Bedienungsanleitung Seite 5

7. Adjust the height of the heater head by undoing
the locking knob on the tube. Tighten the knob when
the height has been set.
Operating instructions
1. Plug the mains lead into a wall socket.
2. Tilt the heater head to the desired angle by pressing in
the release catch.
3. Select one of the heat settings:
- [ I ] 900 W.
- [ II ] 1200 W.
- [ I + II ] 2100 W.
4. Always unplug the patio heater when you have finished
using it.
Note: Although the patio heater is resistant to water sprays,
it should not be used in the rain or wet conditions.
8. Fasten the mains lead to the bottom
of the base using the cable restraints
and the four included M4 screws.
5