Mettler Toledo IND560 Serie Bedienungsanleitung Seite 9

Precautions
• READ this manual BEFORE operating or servicing this equipment and FOLLOW
these instructions carefully.
•
SAVE this manual for future reference.
• DO NOT allow untrained personnel to operate, clean, inspect, maintain, service
or tamper with this equipment.
• ALWAYS DISCONNECT this equipment from the power source before cleaning
or performing maintenance.
•
CALL METTLER TOLEDO for parts, information and accessories.
METTLER TOLEDO ASSUMES NO RESPONSIBILITY FOR CORRECT
INSTALLATION OF THIS EQUIPMENT WITHIN A DIVISION 2 OR ZONE
2/22 AREA. THE INSTALLER MUST BE FAMILIAR WITH ALL DIVISION
2 OR ZONE 2/22 WIRING AND INSTALLATION REQUIREMENTS.
THE IND560xx TERMINAL IS NOT INTRINSICALLY SAFE! DO NOT
USE WITHIN AREAS CLASSIFIED AS HAZARDOUS DIVISION 1 OR
ZONE 0/1/21 BECAUSE OF COMBUSTIBLE OR EXPLOSIVE
ATMOSPHERES. FAILURE TO COMPLY WITH THIS WARNING COULD
RESULT IN BODILY HARM AND/OR PROPERTY DAMAGE.
DISCONNECT ALL POWER TO THIS UNIT BEFORE INSTALLING,
SERVICING, CLEANING, OR REMOVING THE FUSE. FAILURE TO DO
SO COULD RESULT IN BODILY HARM AND/OR PROPERTY DAMAGE.
THE IND560xx TERMINAL HAS AN APPROVAL TEMPERATURE
RATING OF T4 (135° C). IT MUST NOT BE USED IN AREAS WHERE
THE AUTO IGNITION TEMPERATURE OF THE HAZARDOUS MATERIAL
IS BELOW THIS RATING.
ONLY THE COMPONENTS SPECIFIED IN THIS MANUAL CAN BE
USED IN THIS TERMINAL. ALL EQUIPMENT MUST BE INSTALLED
IN ACCORDANCE WITH THE INSTALLATION INSTRUCTIONS
DETAILED IN THIS MANUAL. INCORRECT OR SUBSTITUTE
COMPONENTS AND/OR DEVIATION FROM THESE INSTRUCTIONS
CAN IMPAIR THE SAFETY OF THE TERMINAL AND COULD RESULT
IN BODILY INJURY AND/OR PROPERTY DAMAGE.
WARNING
WARNING
WARNING
WARNING
WARNING