Cleaning And Care; In The Event Of Calcium Deposits - Silvercrest KH 1134 Bedienungsanleitung

(The water does not start boiling in the keep warm
range!).
• After reaching the desired temperature, the ap-
pliance switches off the heating process. The
e
ON/OFF switch
remain switched on.
Because the device is equipped with a heat
maintenance function, the device automatically
begins reheating as soon as the water tempe-
rature falls below the set temperature.
The appliance heats until the desired tempera-
ture is reached. Make sure that the appliance
does not automatically switch on to the keep
warm function. Therefore, do not leave the
appliance unsupervised!
• As soon as the kettle
t
, the ON/OFF switch
r
operating lights switch off.
• In order to halt the heating process, push the
ON/OFF switch e
r
light goes out then as well.
Avoid setting the temperature controller
the transition range, as the water can start boi-
ling on account of varying filling levels.
Warning: Pull the power plug from the
socket before lifting the kettle
base t . This prevents any water
splashing out from contacting the electrical
connections in the base
cause a short circuit.
For safety reasons, the lid
be opened while the water is boiling or is
very hot. Otherwise there is a risk of
injury.
and the operating lights
u
is lifted from the base
e
jumps out and the
up again. The operating
y
u from the
t , which could
q should not

Cleaning and Care

Danger!: Do not open any part of the
housing. There are no operating elements
r inside. An open housing can create the risk
of a life-threatening electrical shock.
Never submerse any parts of the device in
water or other liquids! This can create the
risk of a life-threatening electrical shock if
residual liquid comes into contact with
powered components.
Before cleaning the device, ....
• First pull the power plug out of the power socket
and let the device cool completely.
• Clean the exterior surfaces and the power cord
with a slighly damp cloth. Always dry the device
well before using it again.
• Never use any cleansers, abbrasive substances
or solvents. These can damage the device.

In the event of calcium deposits

• Purchase a decalcifying agent suitable for use
in with food containers from a household goods
stores (e.g. coffee machine decalcifier).
• You can use a suitable product from a
specialised dealer for the stainless steel
container bottom.
Removing / replacing the spout screen
• Open the lid
• Press down on the edge of the spout screen
from above in order to remove it toward the
inside.
• Clean the spout screen
moistened wash cloth.
• After cleaning, insert the spout screen
above and press it firmly into place.
- 6 -
q
completely.
o
with a lightly
o
o from