Herunterladen Inhalt Inhalt Diese Seite drucken

Electric Kettle; Intended Use; Technical Data; Operating Elements - Silvercrest KH 1134 Bedienungsanleitung

Vorschau ausblenden Andere Handbücher für KH 1134:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 45

ELECTRIC KETTLE

Intended Use

This device is intended for heating water for house-
hold use. It is not intended for use with other liquids
or for commercial use.

Technical Data

Voltage:
220 - 240 V ~ / 50 Hz
Power consumption: 2500 - 3000 W
In older electrical installations, the building
fuse (12A) may be triggered due to the high
power consumption.

Operating elements

q
Lid
w
Unlocking button
e
ON/OFF switch
r
Operating light
t
Base
y
Temperature controller
u
Kettle
i
Level indicator
o
Spout screen

Safety Instructions

To avoid the risk of fatalities from electric
shocks:
• Make certain that the base
connections never comes into contact with
water! Let the base
before using if it has accidentally become wet.
• Only use the hot water kettle with the supplied
t
base
.
• Make sure that the power cord never becomes
wet or damp during operation. Lay the cord such
that it cannot be pinched or otherwise
damaged.
• Arrange for defective power plugs and/or
cables to be replaced as soon as possible by a
qualified technician or by our Customer Service
Department to avoid the risk of injury.
• Always pull the plug out of the power socket
after use. Switching off the device is not sufficient
because the device receives power as long as
the power plug is connected to the socket.
Ensure that the appliance, the power cable
and the power plug are NEVER submersed
in water or other fluids.
To prevent the risk of fire or injury:
• Always heat water with a closed lid
se the automatic cut-out mechanism doesn't
work. Boiling water can then spray out over the
edge.
• Hot steam clouds may be released. The kettle
is also very hot during operation. Wear oven
mits.
• Make certain that the device rests firmly and ver-
tically before switching it on. Boiling water can
cause an unstabile kettle to fall over.
• Do not use an external timing switch or a separate
remote control system to operate the appliance.
- 4 -
t
with the electrical
t
become completely dry
q
, otherwi-
u

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis