Cleaning And Care - Silvercrest SWKS 2400 F2 Bedienungsanleitung

Cleaning and Care

│
■ 8
Downloaded from www.Manualslib.com
1) Lift the kettle off of the base when filling it!
2) Press the unlocking button
NOTE
► When filling it, hold the kettle upright. This is the only way to read the
markings on the scale
3) Fill the kettle no further than the MAX mark, so that boiling water cannot spill out.
4) First close the lid, then place the kettle on the base
on the base .
5) Now insert the plug into the mains power socket.
6) Push the ON/OFF switch
WARNING - RISK OF INJURY!
► For safety reasons you should not open the lid when the water is boiling or
extremely hot. There is a risk of scalding.
7) The light in the ON/OFF switch
8) As soon as the water is boiling, the appliance will switch itself off, the
ON/OFF switch
INFORMATION
► This appliance is fitted with an overheating protector: if the appliance is
switched on accidentally, without any water in the kettle, the appliance
automatically switches itself off.
If, for example due to a non-closed lid the appliance boils dry, the appliance
switches off automatically.
In such cases first allow the appliance to cool down before using it again.
RISK - ELECTRICAL SHOCK!
► Before cleaning, ALWAYS remove the plug from the mains power socket!
There is the risk of receiving an electric shock!
► Do not open any part of the housing. There are no user-serviceable elements
inside. An open housing will create the risk of a potentially fatal electrical
shock.
NEVER submerse the appliance in water or other liquids! You could
receive a fatal electric shock if residual liquids come into contact with
live components during operation.
GB
manuals search engine
and open the lid.
correctly.
downwards (position "I") so that it engages.
shows that the appliance is now heating up.
clicks upwards and the light goes out.
, so that it sits securely
SWKS 2400 F2