Herunterladen Inhalt Inhalt Diese Seite drucken

Faema E98/S-1 COMPACT Bedienungsanleitung Seite 20

Inhaltsverzeichnis

Werbung

English
Cautions
Danger of burns
The areas marked with this sign become hot.
!
Great care should be taken when in the
vicinity of these areas.
The manufacturer disclaims all liability for damages to items
or persons due to improper use or due to the coffee machine
being used for reasons other than its intended use.
Never work the coffee machine with wet hands or naked feet.
Cup-warming plate
Place only coffee cups, cups and glasses to be used in conjunction
with the coffee machine on the cup-warming plate.
Ensure that the coffee cups are completely drained before placing
them on the cup-warming plate.
No other objects shall be placed on the cup-warming plate.
Machine Close-Down
When the machine remains unattended for a long period of time (at
night, during the weekly closing day or during holidays) the following
operations shall be performed:
- Remove the plug or switch off the main switch.
- Remove water from water reservoir.
- Remove water from pan.
Non-compliance with these safety measures exonerates the
manufacturer from all liability for malfunctions or damage to persons
or items.
If the machine is stored on premises where the temperature
may drop below freezing point, always empty the boiler and the
water circulation pipes.
Water Softener Regeneration
This operation must be made every 250 coffees or at least once a
week.
Remove the water softener from the reservoir and disconnect the
1.
tube connecting it to the machine. (Figure 1).
Turn the softener upside down (Figure 2) and insert the funnel
2.
provided. Pour in 3 measures of coarse kitchen salt (using the
same measure used for the coffee).
Place the softener under the tap (Figure 3) and allow hot water to
3.
pour slowly on the softener. Continue with this procedure until the
salt is dissolved and until the water coming out of the softener is
no longer salty.
Replace the softener into the reservoir and reconnect the tube
4.
connecting it to the machine.
Before preparing other coffees, remove the filter holder (7) from
5.
the group, rotate command knob (2) to position "1" or "coffee" and
leave it in that position until water comes out of the group.
Return the command knob to position "0".
Insert the filter holder (7) into the group.
WARNING: Hot surface
ACHTUNG: Heisse Oberfläche
ATTENTION: Surface chaude
ATTENZIONE: Superficie calda
Danger of Burns
Do not place the hands or other parts of the body close to the coffee
distribution points, or near to the steam and hot water nozzles.
Ensure that the machine is not handled by children or persons who
have not been instructed in its correct use.
Maintenance anda repair
If the machine does not function correctly, switch it off, turn off the
main switch and call the service agent.
Only qualified and authorised servicing personnel should be called.
Use only original spare parts.
Maintenance activities performed by unqualified personnel may
jeopardise the safety of the machine.
If the electric cable is damaged, switch off the machine and apply to
the servicing department for a replacement.
The following measures are indispensable for
ensuring operational and functional safety:
- Comply
with
instructions.
!
- Ensure
that
periodically verify that the protection
devices are intact and that all the safety
devices
function
inspection should be made within 3 years
and subsequently once yearly).
2
English
all
the
manufacturer's
specialized
technicians
correctly
(the
first
1
3

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis