Input Chainring's Number Of Teeth - CAMPAGNOLO ErgoBrain 10 Bedienungsanleitung

6. Input chainring's number of teeth. Start with inner chainring.
Push MODE button to increase the digits, and S/S button to decrease.
Push SET button to fix, then the screen moves to the next chainring.
To return to the former chainring, push S/S and MODE button simulta-
neously.
When chainring's setting is completed, the screen moves to the sprock-
et's setting.
Note: If your setting is [CDC sensor ON] AND [the number of chainring
6
To the Process
- 6
UK
3], the next sprocket setting (step 7) is not required; please move
to step 8.

Input chainring's number of teeth

Inner chainring
F1
Middle chainring
F2
Outer chainring
F3
SET
7 8
Button operation
MODE
Increases the
SET
number of teeth
SET
Goes to
next gear
SET
If [CDC sensor: ON]
AND [the number of
chainring: 3]
To the Process
S/S
Decreases the
number of teeth
S/S MODE
Back to
previous gear
SET
9