Acoustic Functions - CAMPAGNOLO ErgoBrain 10 Bedienungsanleitung

Acoustic Functions

You can select between four available Acoustic functions as described
below.
When beeper is set,
beeper.)
In Stopwatch screen, not only
pending on the choice of the function, the beep sound varies.
Acoustic function
Speed
Cadence
Time
Time and Cadence
Note: If you are not using cadence sensor on your bike, you cannot set
beeper on cadence function.
TM
AVS MXS
DST ODO
G.D.
SPD
Speed Beeper (for lower limit)
When the speed falls below the limit, the
computer emits a long beep.
As long as the speed is below the limit,
the icon flashes.
When the speed goes above the limit, the
computer emits two short beeps.
TM
AVS MXS
DST
ODO
G.D.
SPD
Time Beeper
When you start Effort Time, the computer
emits short beeps.
When you finish Effort Time and start
Recovery Time, the computer emits a
long beep.
icon appears. (Refer to Page 14 for how to set
icon but also function icon appear. De-
Icon
S
C
T
T+C
SPD
STW
SPD
STW/AVS
SPD
STW/MXS
SPD
STW/DST
S
TRAINING
Current Speed
SPD
CDTM
Countdown
Timer
T
Beep emission
all screens
all screens
only training screen
only training screen
TM
AVS MXS
DST ODO
G.D.
When CDC
SPD
sensor is on
Cadence Beeper (for lower limit)
If the cadence goes below the limit, the
computer starts beeping in synchroniza-
tion with your pedalling, and the icon
flashes. When the cadence returns above
the limit, the beeping ceases and the icon
stops flashing.
TM
AVS MXS
DST
ODO
G.D.
SPD
Time+Cadence Beeper
It is the combination of Time and
Cadence beeper functions.
Note: When the display is showing the
number of intervals that you have
reached, cadence beep is not emitted.
CDC
STW
CDC
STW/AVS
CDC
STW/MXS
CDC
STW/DST
C
TRAINING
Cadence
CDC
CDTM
Countdown
Timer
When CDC
sensor is on
T+C
- 13
UK