Herunterladen Inhalt Inhalt Diese Seite drucken

Set Chainring's Shift Timing - CAMPAGNOLO ErgoBrain 10 Bedienungsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 82

9. Set chainring's shift timing.

Danger!
This operation must be performed as you are riding the bicycle.
Therefore, in order to minimize the potential of an accident, this
operation must be performed in a wide, open space which is
free from traffic or other obstacles.
Note: If this is not a "first time" setting, and if you have not changed the
Install the main unit onto your bicycle and ride it.
First, shift into the inner chainring and the fifth sprocket.
Important: In this procedure, Ergopower shifting should be done
Shift from the inner chainring to the middle. Push S/S button. Shift from
the middle to the outer. Push S/S button again. Repeat this operation
with the shifting down from outer - middle - inner. When shift timing
setting is completed, the screen moves to the measuring screen.
Note: If "Error" display appears on the screen, the main unit is not in-
8123 9 85.4977866.2831847.0685820.7853988
- 8
UK
chainrings or adjusted the tension of the front derailleur cable
since last time, you can skip this procedure. To skip this, just push
S/S button. This completes all the setting and the screen moves
to measuring mode.
slowly and steadily. S/S button should be pushed when
the chain has securely shifted to the next chainring.
stalled firmly onto the bracket, or there may be a problem with the
sensor of the Ergopower lever.
Shift chainring
S/S
To measuring screen
Important:
In this page, the operation of S/S
button should be done with the
lever's button.
Start with
the inner chainring
and the fifth sprocket.
F-1/R-5
Memorize timing
at each shift
S/S
F2 - 3 - 2 - 1
Continue shifting and
push S/S button
each time.

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis