Name And Function Of The Controls - Clarion NAX963HD Benutzerhandbuch

NAX963HD_280QY5000EA-00_EN.book Page 9 Thursday, May 11, 2006 8:05 PM

Name and Function of the Controls

Main Unit (Only VRX868RVD)
This section explains only the buttons on VRX868RVD used during the Navigation mode. For other
buttons, see the operation manual of VRX868RVD.
Note:
The navigation system will not work correctly when driving under the conditions described below. To display the
accurate vehicle position, drive for a while on a smooth road where there is no obstacle in upper sky (GPS
signals can be received).
a. When driving with the power of the main unit turned off.
b. When driving with the DCP (Detachable Control Panel) removed.
1 [VOICE] button
Switches to the voice operation mode. ➜ "Voice
Command Operations" (P. 59)
2 [MAP] button
Displays the Map screen of the current location.
The screen changes as follows if this button is
pressed while displaying the Map screen during
the route guidance mode:
Press and hold:
Displays the Turn by Turn screen. Press again to
return to the Map screen.
Press and release:
When you have set to display the guidance
information in the left of the screen, pressing this
button changes the screen to Intersection Map,
Turn List on Route, and Current Location Map, in
this order.
1 2 3 4
3 [MONI] button
Displays the Screen Adjustment menu on top of
the current screen. ➜ "Monitor Adjustment" (P.
55)
4 [MENU] button
Displays the Top menu of the navigation system.
Note:
When you operate the other buttons, the operation
results are displayed at the bottom of the Map
screen according to the button features.
9
NAX963HD