Others; Troubleshooting; Error Messages - Clarion NAX963HD Benutzerhandbuch

NAX963HD_280QY5000EA-00_EN.book Page 63 Thursday, May 11, 2006 8:05 PM

9. Others

Troubleshooting

Problem
RDS-TMC
The provider of RDS-TMC is not
automatically selected.
The menu screen is not
displayed.
Too many landmark icons are
displayed on the map.

Error Messages

Error Message
USB memory device
ACCESS ERROR
The USB memory device cannot
be accessed.
Hard Disk Drive
TEMP ERROR
Cannot operate correctly due to
high temperature. Please wait
until temperature becomes
normal again.
TEMP ERROR
Cannot operate correctly due to
low temperature. Please wait
until temperature becomes
normal again.
ACCESS ERROR
Malfunction occured in the HDD.
Please consult your nearest
dealer.
Cause
The aerial is not connected.
[Manual] is selected on the
Select TMC Provider screen.
Certain keys/functions are not
available for your safety during
driving.
According to system settings,
many landmark icons are
displayed according to the
current location.
Cause
The USB memory is not
connected correctly.
The USB memory is not
recognised.
The HDD cannot be accessed
because the temperature in the
vehicle is extremely high.
The HDD cannot be accessed
because the temperature in the
vehicle is extremely low.
The HDD cannot be accessed.
The sectors or clusters of the
HDD may be damaged.
Remedy
Confirm the connection of the
aerial.
Select [Automatic].
Menu is displayed again when
the vehicle is stopped in a safe
place.
You can set the system not to
display landmark icons.
"Landmark Icon display" (P.
46)
Remedy
Connect the USB memory again.
Connect another USB memory.
Please wait until the temperature
becomes appropriate.
Please wait until the temperature
becomes appropriate.
Please consult you nearest
dealer.
NAX963HD
63