Clock Settings; Language Setting; Volume/Voice Settings - Clarion NAX963HD Benutzerhandbuch

NAX963HD_280QY5000EA-00_EN.book Page 52 Thursday, May 11, 2006 8:05 PM

Clock Settings

When you touch the [Clock] key from the Setting menu, you can set the clock display.
"On-Screen Clock" :
Shows/hides the clock display on the navigation
screen.
"Clock Format" :
Changes the clock format to 12-hour/24-hour
format.
"Daylight Saving Time" :
Selects whether to apply the daylight saving time
or not.
"Offset Adjust" :
Adjusts the current time manually. The
adjustment is applied as offset value related to

Language Setting

By touching the [Language] key from the Setting menu, you can select the language used by the
navigation system from the following nine languages:
[English (mile)] key :
[English (km)] key :
[Français] key :
[Deutsch] key :
[Español] key :

Volume/Voice Settings

By touching the [Volume/Voice] key form the Setting menu, you can set whether to activate the voice
guidance function or not, and can adjust various voice related settings.
"Guidance Voice" :
Sets whether to activate the voice guidance.
"Vol:Normal Speed" :
Adjusts the volume of the voice guidance when
the vehicle speed is normal.
"Vol:High Speed" :
Adjusts the volume of the voice guidance when
the vehicle speed is high.
52
NAX963HD
the time signal received via GPS. Touching the
[+] or [–] key changes the time by 1 minute.
Normally, it is not necessary to adjust because
time is received from the GPS signals
automatically.
"Time Zone" :
Sets the time zone. You can select from the list of
74 regions including the [Auto] key.
When you touch the Auto key, the clock is
automatically switched to the time zone of the
country at the vehicle position.
[Italiano] key :
[Nederlands] key :
[Português] key :
[Svenska] key :
[Dansk] key :
"Voice Announcements" :
Sets the number of repetitions of the voice
guidance per guidance point.
"Beep Sound" :
Sets a beep sound and Favourite & Frequent
menu operation sound to ON/OFF.
"Voice Feedback" :
Sets whether voice feedback is provided when
using voice commands or not.