Inhaltsverzeichnis
Werbung
Recording at a specified time (TIMER RECORDING)
• When the unit is not in the stop state, press
[STOP g/RETURN].
• If an SD card is selected as the recording destination,
insert the SD card beforehand. (➜ page 24)
1
Press [MENU].
Press u, i to select " " and
2
press [q OK] to enter.
Press +, – to select the recording
3
time and press i.
: 30 minutes
:
: 2 hours
: Until there is no empty space
: Disable the timer setting
Press +, – to select the hour for the
4
time to start recording and press i.
●
If the power is off at the specified time, the power turns on and the timer recording starts, and then
the power turns off at the end time.
If the unit is in a playback state, playback stops and the timer recording starts.
●
During timer recording, only stop operation and volume adjustment can be performed. Switch the
Hold function to off before operation if it is on.
●
Timer setting is disabled when the battery is replaced. Therefore, readjust the setting after replacing battery.
1 hour
Press +, – to select the minute for
5
the time to start recording and
press i.
Press +, – to select the recording
6
destination and press [q OK] to enter.
: SD card
: Internal memory
To exit the setting screen, press
[STOP g/RETURN].
After you set a timer recording, " " is displayed.
At 1 minute before the specified time, the " ",
recording indicator, and " " blink and the unit
enters the standby state.
" " blinks during timer recording.
If you press [STOP g/RETURN] during a timer
recording or standby, you can cancel the timer
recording.
19
19
Werbung
Inhaltsverzeichnis
