Inhaltsverzeichnis
Werbung
Switching microphone position
You can switch the microphone position to ZOOM to
record with the sound in front of you emphasised. Switch
the microphone position depending on the use.
STEREO
Microphone position
STEREO
Operates as an ordinary
stereo microphone.
ZOOM
Records with the sound in
front of you emphasised.
●
Do not switch the microphone position during recording. The
sound that occurs when switching is performed is also recorded.
●
The microphone position function operates when the built-in
microphone is used. It does not operate when an external
microphone is connected for recording ( ➜ page 28) or when a
different device is connected for recording to this unit ( ➜ page 30).
ZOOM
Recommended uses
Suitable for recording
events such as a meeting
or performance by a
large number of people.
Suitable for recording
events such as a lecture
or interview, where sound
is emitted from a specific
direction.
Recording
Note when recording
This unit is equipped with a high-sensitivity microphone.
Accordingly, if a breath or wind directly hits the
microphone during recording, the wind-cutting sound
may be recorded or voice may be difficult to hear.
1. This can be prevented
by blocking the wind
with your body so that
the wind does not
directly hit the unit.
2. During dictation recording,
slightly move this unit from
front of your mouth or keep
distance.
Turning the LOW CUT FILTER ( ➜ page 17) to ON
reduces the sound of low frequency range. This may
help the reduction of the wind-cutting sound.
●
Sound may jump during recording (especially PCM
recording) depending on use conditions of the internal
memory and SD card. Formatting them on this unit
( ➜ page 14) before recording is recommended.
Keep distance
11
11
Werbung
Inhaltsverzeichnis
