Switching Microphone Sensitivity; Reducing Low Frequency Noise During Recording - Panasonic RR-XS350 Bedienungsanleitung

Switching microphone
sensitivity
Switch the microphone sensitivity according to the
volume of the sound source. When the sound source
volume is loud, set the sensitivity to " " (LOW).
When it is low, set the sensitivity to " " (HIGH).
• When the unit is not in the stop state, press
[STOP g/RETURN].
1
Press [MENU].
Press u, i to select " " and
2
press [q OK] to enter.
3 Press +, – to select "
: Sets the microphone sensitivity to the
high level.
: Sets the microphone sensitivity to the
low level.
(The factory setting is " ".)
4
Press [q OK] to enter.
To exit the setting screen, press
[STOP g/RETURN].
When the microphone
sensitivity is or ,
" " or " " is displayed
respectively.
Reducing low frequency
noise during recording
Sound of low frequency range is reduced during
microphone recording. This is effective when
reducing noise of air conditioning equipment,
etc. while recording at a meeting, etc. (LOW
CUT FILTER)
• When the unit is not in the stop state, press
[STOP g/RETURN].
Press [MENU] .
1
Press u until "
2
is displayed and press [q OK] to
" or " ".
enter.
Press +, – to select "On" and press
3
[q OK] to enter.
(The factory setting is "OFF".)
To exit the setting screen, press
[STOP g/RETURN].
" (blinking)
17
17