CityCom 202 10001 Bedienungsanleitung Seite 70

Guide of Main Menu
E29
3. Press the Red(
successfully exit from input mode.
If press the button at symbol rate value input mode,
the value will be confirmed, and if you moves left or right
column use the
symbol rate to input. Then press the
Red( )button to exit from input mode.
To delete a Symbol Rate in the above list, press the
0 (Numeric button) in the selected position and then the symbol rate
disappears. The range of Symbol Rate that is input additionally is
16-30Ms/s.
N N o o t t e e : The user should select the Satellite name in Antenna
N N o o t t e e
Setting menu. When the user types the Satellite Name
separately, the search type is fixed to the Detail mode.
Press the button anywhere to start Automatic Search.
The picture during searching is as follows.
The picture searches with varying frequency, Symbol Rate and
FEC etc. Satellite Name is the name that the user selects to
correspond with Antenna Alternative of Antenna Setting.
The progress bar(%) appears on bottom of the picture.
During the search, services that are found are displayed as follows:
1. Press the button during Automatic Search to stop search.
2. After the search is finished, the appearite message appears.
3. Press the button to return Service Search menu.
3-4. Status
STB Status
Displays the information of H/W Version, S/W Version, Loader
Version and so on.
Signal Detection
Shows the Signal Level(AGC level) and Signal Quality(BER) of the
current service and is help to the initial antenna setting.
)button for confirmation, and you will
buttons, you can differ values of
and the