CityCom 202 10001 Bedienungsanleitung Seite 61

A/V Output Setting
Video Output (CVBS/S-Video/RGB)
Set the video mode for the TV SCART output.
Audio Output
Set the audio mode which is output from the TV SCART and
RCA/Cinch Jack. (Stereo/Mono)
Screen Mode
Select the aspect ratio of TV which is connected to STB
(4:3 or 16:9).
Display Format
Select the format which the video is to be displayed on screen.
When your TV set is 4:3 and video source is 16:9,
STB will display in Letter-box or Centre mode as selected.
When your TV set is 16:9 and video source is 4:3,
STB will display in the Pillar-box or Full mode as selected.
Other Setting
Select the OSD Transparency and Information Box Display Time.
OSD Transparency
Select the OSD Transparent type. It affects Information box,
Soundtrack, Subtitle, Service list, Time and Quick mode of
TV Guide. Use the
Info.Box Display Time
Set the display duration of information box displayed on the screen
after changing services. The time ranges from 0 to 20 seconds.
buttons to toggle transparent and opaque.
E20