CityCom 202 10001 Bedienungsanleitung Seite 67

Manual Search
Set the search parameters (Frequency, Symbol Rate, etc.) to
manually find the services that you have selected in the
transponder.
The bar on bottom of the submenu shows the signal quality(BER)
of the entered parameters.
Antenna Alternative
Select the target antenna for Manual Search.
The Satellite Name helps you select antenna alternatives.
This is only for reference and cannot be changed on this menu.
Antenna Alternative 16 is for SMATV.
Frequency
Use the Numeric buttons(0~9) on the remote control unit.
Polarisation
Use the buttons to select the Polarisation of the transponder.
(Auto, Horizontal, Vertical)
• Horizontal : 18 V are output through LNB line
• Vertical : 13.5 V are output through LNB line
Symbol Rate
Inputs the Symbol Rate of the transponder you want to find.
Use the buttons or Numeric buttons on the remote control unit.
FEC (Forward Error Correction)
Use the buttons to select the Forward Error Correction of the
transponder. You can select the value of Auto, 1/2, 2/3, 3/4, 5/6 and
7/8.
E26