CityCom 202 10001 Bedienungsanleitung Seite 65

Antenna Setting
Selects the antenna and LNB settings for service search.
As you can change the settings for 22 kH z T one and DiSEqC switch,
there are 16 possible Antenna Setting for use.
The values that are set in this menu will be available for selection in
other service searching menus.
Antenna Alternative
There are 16 antenna alternatives, each one can have different
combinations of settings for 22 KHz Tone and DiSEqC switch.
Satellite Name
Selects the Satellite Name that corresponds to the value of the
Antenna Alternative.
1. Press the buttons to display the satellite list box.
2. Select the wanted Satellite Name.
3. If the desired Satellite Name is not listed then select User
Defined.
4. The keyboard will appear and you can type the Satellite Name
directly.
The selected Satellite Name can help you select the Antenna
Alternative in the searching menu, but it is possible to change
or select the Satellite Name only in the Antenna Setting menu.
5. Satellite Name is listed in alphabetical order and the order can
be changed according to Menu Language.
6. When inputting the Satellite Name, there is a 14 character limit.
LNB Frequency
1. Select the L.O. Frequency that is set to antenna.
2. Use the buttons to select the LNB frequency (Universal,
5150, 9750, 10600, 10750, 11475MHz or 0, 1, ......., 9).
3. If the required LNB Frequency is not available, then select "0"
and enter the frequency manually using the Numeric buttons
(0~9).
4. When you select Universal, both 9750 and 10600MHz are
supported at the same time.
The 22KHz Tone setting is unnecessary. (Disabled)
E24