Malfunctions - attika Q-BE INSERT Bedienungsanleitung

English
Remove dirt and dust, and mount the
parts in reverse order.
NOTE!
Be careful when replacing the smoke converter plate and the smoke barrier.

Malfunctions

Smoke spillage around door
May be caused by too weak draft in the chimney <12Pa
• check the flue or chimney for clogging
• check whether the extraction hood is switched on; if it is, switch it off and open a win-
dow/door in the proximity of the stove for a short while.
Soot on glass
May be caused by
• the firewood being too wet
ensure the proper heating of the stove when lighting, prior to closing the door
Stove is burning too strong
Possible cause:
• leak around the door seal
• chimney draught too strong (>22 Pa), draught regulator should be installed
Stove is burning too weakly
Possible cause:
• insufficient amount of wood
• insufficient air supply for room ventilation
• failure to clean the flue ducts
• leaky chimney
• leakage between chimney and flue
22
attika
RAIS/ - User Manual Q-BE INSERT